|
||||||||||||||||
| ||||||||||||||||
|
|
|
Quantity adjustment on next page Series S-05-125 Optional Plunger Return Spring: SP08  If the internal wire gauge for winding is predetermined or if the "voltage" is different from the above, enter the desired information in the above box labeled "Special Comments" and select the closest "voltage" and "duty cycle". C = Continuous (100%) Duty Cycle, Maximum On-Time = Infinite Approximate Input Power = 4.5 Watts Force at 0.025" (0.6 mm) stroke: 80.0 Oz (2268 gr) Force at 0.10" (2.5 mm) stroke: 7.0 Oz (198 gr) Force at 0.20" (5.1 mm) stroke: 1.5 Oz (43 gr) I = Intermittent (50%) Duty Cycle, Maximum On-Time = 100 Seconds Approximate Input Power = 9 Watts Force at 0.025" (0.6 mm) stroke: 105.0 Oz (2977 gr) Force at 0.10" (2.5 mm) stroke: 15.5 Oz (439 gr) Force at 0.20" (5.1 mm) stroke: 3.5 Oz (99 gr) L = Long Pulse (25%) Duty Cycle, Maximum On-Time = 30 Seconds Approximate Input Power = 18 Watts Force at 0.025" (0.6 mm) stroke: 120.0 Oz (3402 gr) Force at 0.10" (2.5 mm) stroke: 29.0 Oz (822 gr) Force at 0.20" (5.1 mm) stroke: 7.0 Oz (198 gr) Force at 0.25" (6.4 mm) stroke: 2.5 Oz (71 gr) P = Pulse (10%) Duty Cycle, Maximum On-Time = 10 Seconds Approximate Input Power = 45 Watts Force at 0.025" (0.6 mm) stroke: 180.0 Oz (5103 gr) Force at 0.10" (2.5 mm) stroke: 73.0 Oz (2070 gr) Force at 0.20" (5.1 mm) stroke: 20.0 Oz (567 gr) Force at 0.25" (6.4 mm) stroke: 7.8 Oz (221 gr) Low Profile Solenoid, Push/Pull type, 1.25" (32 mm) DIA X 0.50" (13 mm) L. Mounting: Two bolts 4-40 on the back plate. Minimum Heat Sink: Equivalent of 4.0" x 4.0" x 0.125" (102 mm x 102 mm x 3.2 mm) Aluminum Plate All values are at 25ºC. Duty Cycle= on time/(on time+off time) in one cycle of operation when voltage is being cycled on and off. V = R × I P = V × I = V² /R = R × I² V = input D.C. voltage (volts) R = solenoid resistance (ohms) I = current used by solenoid (amperes) P = input power to solenoid (watts) Quantity adjustment on next page 
|
Copyright © ElectroMechanicsOnline.com