|
||||||||||||||||
| ||||||||||||||||
|
|
|
Quantity adjustment on next page Series R-09-150-SCWM  If the internal wire gauge for winding is predetermined or if the "voltage" is different from the above, enter the desired information in the above box labeled "Special Comments" and select the closest "voltage" and "duty cycle". C = Continuous (100%) Duty Cycle, Maximum On-Time = Infinite Approximate Input Power = 9 Watts Starting Gross Torque: 2.8 Oz-In (202 gr-cm) Spring Torque: 1.8 Oz-In (130 gr-cm) Starting Net Torque: 1.0 Oz-In (72 gr-cm) I = Intermittent (50%) Duty Cycle, Maximum On-Time = 300 Seconds Approximate Input Power = 18 Watts Starting Gross Torque: 6.0 Oz-In (432 gr-cm) Spring Torque: 1.8 Oz-In (130 gr-cm) Starting Net Torque: 4.2 Oz-In (302 gr-cm) L = Long Pulse (25%) Duty Cycle, Maximum On-Time = 60 Seconds Approximate Input Power = 36 Watts Starting Gross Torque: 11.0 Oz-In (792 gr-cm) Spring Torque: 1.8 Oz-In (130 gr-cm) Starting Net Torque: 9.2 Oz-In (662 gr-cm) P = Pulse (10%) Duty Cycle, Maximum On-Time = 12 Seconds Approximate Input Power = 90 Watts Starting Gross Torque: 21.0 Oz-In (1512 gr-cm) Spring Torque: 1.8 Oz-In (130 gr-cm) Starting Net Torque: 19.2 Oz-In (1382 gr-cm) Rotary Solenoid, Clockwise, 1.50" (38 mm) DIA X 0.87" (22 mm) L, Forward Shaft Extension. Direction of rotation viewed from the face opposite mounting studs as shown in the mechanical drawing. Mounting: Two bolts 8-32 (or M4 X 0.7) on the back plate. Built-in Return Spring Total Rotational Stroke: 40º Minimum Heat Sink: Equivalent of 6.0" x 6.0" x 0.125" (152 mm x 152 mm x 3.2 mm) Aluminum Plate All values are at 25ºC. Duty Cycle= on time/(on time+off time) in one cycle of operation when voltage is being cycled on and off. V = R × I P = V × I = V² /R = R × I² V = input D.C. voltage (volts) R = solenoid resistance (ohms) I = current used by solenoid (amperes) P = input power to solenoid (watts) Quantity adjustment on next page 
|
Copyright © ElectroMechanicsOnline.com