|
||||||||||||||||
| ||||||||||||||||
|
|
|
Quantity adjustment on next page The Cycling System is designed for Life Cycling and Endurance Testing of Electro-Mechanical components. Each system may drive up to sixteen independent devices with different actuation profiles. Additional units may require additional internal controllers at an additional cost. This system can control and drive four devices using pick and hold modules. The typical applications of the Cycling System testers is life cycling of the solenoids, relays, motors, voice coil motors, actuators, valves, keyboards, switches, and other applicable devices. The compact and stand-alone unit consists of Controller, Drivers, and the Power Supplies. It conveniently connects to the serial port of the host computer. The system may be controlled in different ways; 1) Stand-alone In this mode, the controller does not need an external device such as a PC to operate. The easy controller code is developed, downloaded to the controller, run and saved in the controller non-volatile memory using the supplied Integrated Development Environment (IDE). 2) Externally Controlled In this mode, the external host such as a PC, micro-controller or PLC sends a series of commands to the controller via the RS-232 serial port. The controller processes and performs the incoming commands and responds with proper messages. Standard model is supplied with an 80 Watt, +24 VDC power supply. Different power supplies are available upon request. Quantity adjustment on next page 
|
Copyright © ElectroMechanicsOnline.com