Pick & Drop Timer Driver Module - solenoids, electromagnets, drivers and other industrial supplies at ElectroMechanicsOnline.com


Solenoids	Electromagnets	Electronics	Electric Cylinders	Magnets	Wire	Linear Motors	Springs

Search

only one keyword search term per box

Categories

Home

Pick & Drop Timer Driver Module
item #: ELSOPDM950

you may also consider

Solenoid Driver Module

ELSOSDM840

Unit Price:
1-4 pieces:	$286.68
5-9 pieces:	$258.02
10-24 pieces:	$245.12
25-49 pieces:	$232.91
50-99 pieces:	$221.24
Prices for larger quantities may be obtained by contacting us or by clicking the RFQ below.
OEM quantities, more than 100 units or special instructions:




Special Comments

Quantity adjustment on next page

The Pick and Drop Driver Module; PDM950, applies a single pulse to the solenoid or electromagnet, then drops the supply voltage to zero. This is done by applying a signal to the trigger input of the module.

The trigger voltage could be a TTL / CMOS compatible signal or any voltage between 2.5 VDC and the DC power source supply voltage. The pick time is set using an onboard potentiometer and can be adjusted between 2 milliseconds and one minute.

This product is RoHS complaint.

Performance Specifications

Parameter	Min	Typical	Max	Units
Supply Voltage (Vcc)	9		50	VDC
Peak Current			15	Amp
RMS Current		4		Amp
Command Range	2.5		Vcc	VDC
Operating Temperature	0		50	Deg C
Storage Temperature	-40		125	Deg C

Quantity adjustment on next page