Solenoid, Tubular, Pull Type - solenoids, electromagnets, drivers and other industrial supplies at ElectroMechanicsOnline.com


Solenoids	Electromagnets	Electronics	Electric Cylinders	Magnets	Wire	Linear Motors	Springs

Search

only one keyword search term per box

Categories

Home

Solenoid, Tubular, Pull Type
item #: SOTUL010025

Made in USA

Availability: in stock - available for immediate shipment

Series S-10-38
Tubular Solenoid, Pull type, 0.38"(9.7 mm) DIA X 1.00"(25.4 mm) L

Related Optional Products

On-Off Power Cycling Module - Adjustable Duty

ELSOOPC955

Solenoid Driver Module

ELSOSDM840

Unit Price:
1-4 pieces:	$44.81
5-9 pieces:	$39.31
10-24 pieces:	$35.06
25-49 pieces:	$31.35
50-99 pieces:	$27.04
Prices for larger quantities may be obtained by contacting us or by clicking the RFQ below.
OEM quantities, more than 100 units or special instructions:

select a DC voltage	03	06	09	12	15	18	21	24	30	36

select a duty cycle	C	I	L	P


Special Comments

Quantity adjustment on next page

Series S-10-38
Optional Plunger Return Spring: SP04, SP06, SP08

If the internal wire gauge for winding is predetermined or if the "voltage" is different from the above, enter the desired information in the above box labeled "Special Comments" and select the closest "voltage" and "duty cycle".

C = Continuous (100%) Duty Cycle, Maximum On-Time = Infinite
Approximate Input Power = 2 Watts
Force at 0.01" (0.3 mm) stroke: 7.4 Oz (2.05 N)
Force at 0.05" (1.3 mm) stroke: 2.2 Oz (0.60 N)
Force at 0.10" (2.5 mm) stroke: 1.0 Oz (0.29 N)
Force at 0.20" (5.1 mm) stroke: 0.5 Oz (0.15 N)
Force at 0.30" (7.6 mm) stroke: 0.4 Oz (0.10 N)
Force at 0.40" (10.2 mm) stroke: 0.2 Oz (0.06 N)

I = Intermittent (50%) Duty Cycle, Maximum On-Time = 65 Seconds
Approximate Input Power = 4 Watts
Force at 0.01" (0.3 mm) stroke: 9.0 Oz (2.50 N)
Force at 0.05" (1.3 mm) stroke: 3.3 Oz (0.93 N)
Force at 0.10" (2.5 mm) stroke: 1.9 Oz (0.52 N)
Force at 0.20" (5.1 mm) stroke: 1.1 Oz (0.31 N)
Force at 0.30" (7.6 mm) stroke: 0.7 Oz (0.21 N)
Force at 0.40" (10.2 mm) stroke: 0.5 Oz (0.13 N)
Force at 0.50" (12.7 mm) stroke: 0.2 Oz (0.07 N)
Force at 0.60" (15.2 mm) stroke: 0.1 Oz (0.03 N)

L = Long Pulse (25%) Duty Cycle, Maximum On-Time = 15 Seconds
Approximate Input Power = 8 Watts
Force at 0.01" (0.3 mm) stroke: 10.5 Oz (2.93 N)
Force at 0.05" (1.3 mm) stroke: 4.8 Oz (1.33 N)
Force at 0.10" (2.5 mm) stroke: 2.8 Oz (0.78 N)
Force at 0.20" (5.1 mm) stroke: 1.8 Oz (0.51 N)
Force at 0.30" (7.6 mm) stroke: 1.3 Oz (0.37 N)
Force at 0.40" (10.2 mm) stroke: 0.8 Oz (0.23 N)
Force at 0.50" (12.7 mm) stroke: 0.4 Oz (0.12 N)
Force at 0.60" (15.2 mm) stroke: 0.2 Oz (0.05 N)

P = Pulse (10%) Duty Cycle, Maximum On-Time = 4 Seconds
Approximate Input Power = 20 Watts
Force at 0.01" (0.3 mm) stroke: 12.0 Oz (3.33 N)
Force at 0.05" (1.3 mm) stroke: 6.6 Oz (1.83 N)
Force at 0.10" (2.5 mm) stroke: 4.3 Oz (1.20 N)
Force at 0.20" (5.1 mm) stroke: 3.3 Oz (0.93 N)
Force at 0.30" (7.6 mm) stroke: 3.0 Oz (0.84 N)
Force at 0.40" (10.2 mm) stroke: 2.2 Oz (0.60 N)
Force at 0.50" (12.7 mm) stroke: 1.1 Oz (0.32 N)
Force at 0.60" (15.2 mm) stroke: 0.4 Oz (0.11 N)
Force at 0.70" (17.8 mm) stroke: 0.1 Oz (0.02 N)

Tubular Solenoid, Pull type, 0.38"(9.7 mm) DIA X 1.00"(25.4 mm) L.
Mounting: Threaded front end and matching 5/16"-32 nut.
Minimum Heat Sink: Equivalent of 2.0" x 2.0" x 0.125" (51 mm x 51 mm x 3.2 mm) Aluminum Plate
All values are at 25ºC.

Duty Cycle= on time/(on time+off time) in one cycle of operation when voltage is being cycled on and off.

V = R × I
P = V × I = V² /R = R × I²

V = input D.C. voltage (volts)
R = solenoid resistance (ohms)
I = current used by solenoid (amperes)
P = input power to solenoid (watts)

Quantity adjustment on next page