Solenoids
Electromagnets
Electronics
Electric Cylinders
Magnets
Wire
Linear Motors
Springs

Solenoids

Electromagnets

Electronics

Electric Cylinders

Magnets

Wire

Linear Motors

Springs

Search

and or

only one keyword search term per box

 

Categories

Home

Electromagnet, Tubular
item #:  ELMATU038055

Made in USA



Availability:  in stock - available for immediate shipment

Series E-22-150
Electromagnet, Tubular, 1.50" (38 mm) DIA X 2.15" (55 mm) L

Related Optional Products
Full Wave Bridge Rectifier
ELFWBL352

Plug-in Adapter Power Supply, 10.5 VDC, 1300MA
ELPS10D120A1300

Unit Price:   
    1-4 pieces: $145.06  
    5-9 pieces: $119.64  
10-24 pieces: $99.47  
25-49 pieces: $83.07  
50-99 pieces: $69.89  
Prices for larger quantities may be obtained by contacting us or by clicking the RFQ below.  
OEM quantities, more than 100 units or special instructions:
  
select a DC voltage
06
09
12
18
24
30
36
48
72
120

select a duty cycle
C
I
L
P
Special Comments


Quantity adjustment on next page

Series E-22-150


If the internal wire gauge for winding is predetermined or if the "voltage" is different from the above, enter the desired information in the above box labeled "Special Comments" and select the closest "voltage" and "duty cycle".

C = Continuous (100%) Duty Cycle, Maximum On-Time = Infinite
Approximate Input Power = 5 Watts
Holding force against cold rolled steel with a thickness of:
0.375” (9.5 mm): 49 Lb (22.2 Kgf – 218 N)
0.250” (6.4 mm): 46 Lb (20.9 Kgf – 205 N)
0.188” (4.8 mm): 43 Lb (19.5 Kgf – 191 N)
0.125” (3.2 mm): 39 Lb (17.7 Kgf – 174 N)

I = Intermittent (50%) Duty Cycle, Maximum On-Time = 600 Seconds
Approximate Input Power = 10 Watts
Holding force against cold rolled steel with a thickness of:
0.375” (9.5 mm): 53 Lb (24.0 Kgf – 236 N)
0.250” (6.4 mm): 51 Lb (23.1 Kgf – 227 N)
0.188” (4.8 mm): 48 Lb (21.8 Kgf – 214 N)
0.125” (3.2 mm): 44 Lb (20.0 Kgf – 196 N)

L = Long Pulse (25%) Duty Cycle, Maximum On-Time = 180 Seconds
Approximate Input Power = 20 Watts
Holding force against cold rolled steel with a thickness of:
0.375” (9.5 mm): 61 Lb (27.7 Kgf – 271 N)
0.250” (6.4 mm): 59 Lb (26.8 Kgf – 263 N)
0.188” (4.8 mm): 55 Lb (24.9 Kgf – 245 N)
0.125” (3.2 mm): 51 Lb (23.1 Kgf – 227 N)

P = Pulse (10%) Duty Cycle, Maximum On-Time = 60 Seconds
Approximate Input Power = 50 Watts
Holding force against cold rolled steel with a thickness of:
0.375” (9.5 mm): 75 Lb (34.0 Kgf – 334 N)
0.250” (6.4 mm): 71 Lb (32.2 Kgf – 316 N)
0.188” (4.8 mm): 66 Lb (29.9 Kgf – 294 N)
0.125” (3.2 mm): 62 Lb (28.1 Kgf – 276 N)

Tubular Low Profile Electromagnet, 1.50" (38 mm) DIA X 2.15" (55 mm) L.
Mounting: 10-32 threaded hole.
Minimum Heat Sink: Equivalent of 6.0" x 6.0" x 0.125" (152 mm x 152 mm x 3.2 mm) metal Plate
All values are at 25ºC.

Duty Cycle= on time/(on time+off time) in one cycle of operation when voltage is being cycled on and off.

V = R × I
P = V × I = V² /R = R × I²

V = input D.C. voltage (volts)
R = electromagnet resistance (ohms)
I = current used by electromagnet (amperes)
P = input power to electromagnet (watts)



Quantity adjustment on next page

Copyright © 2024 ElectroMechanicsOnline.com